What is a Forging parts at the bottom of the oil cylinder? Introduction to the principle of forging structure

Forging parts at the bottom of the oil cylinderplastic deformation is made to obtain forgings with certain shapes and mechanical properties.。

1、Brief introduction of Forging parts at the bottom of the oil cylinder

Forging parts at the bottom of the oil cylinderis the metal that exerts pressure to shape the required shape or appropriate compression through plastic deformation.，it is widely used in power, pressure vessel, metallurgy, shipping, pressure vessel and other industries，support customization。

Forging parts at the bottom of the oil cylinder

2、Forging parts at the bottom of the oil cylinder characteristics

Forging parts at the bottom of the oil cylinderfeatures include Great forging flexibility, Good mechanical properties, Good mechanical properties, high tenacity and Great forging flexibility，the advantage is Forging machinery can be used to exert pressure on the blank to make it deform plastically, so as to obtain certain mechanical properties.、Forging can eliminate metal porosity and holes, and improve the mechanical properties of Forging parts at the bottom of the oil cylinder.、After forging, its structure and mechanical properties can be improved.、Forging can eliminate the defects of as-cast porosity and optimize the microstructure of metals during smelting.、Forging can not only obtain the shape of mechanical parts, but also improve the internal structure of metal and improve the mechanical and physical properties of metal.，refers to the workpiece or blank obtained by forging metal blank.。

Forging parts at the bottom of the oil cylinder

3、Forging parts at the bottom of the oil cylinder picture

A high-definition picture list of Forging parts at the bottom of the oil cylinder is available for our customers to visit. The physical visit can be made to the factory. The address of the visit is Shanxi, and the time can be reserved in advance. The manufacturer has a special person to receive it.。

Forging parts at the bottom of the oil cylinder

Note: All the pictures in this article were taken by Jianing manufacturer.。

4、Introduction of advantages of Forging parts at the bottom of the oil cylinder

Forging parts at the bottom of the oil cylinders have the following advantages.

1. high-intensity

Through forging, the internal structure of the metal is denser and the grain is refined, thus improving the strength of the material. Hot forging promotes crystallization and grain refinement, which enables materials to achieve the greatest possible strength and consistency, and reduces the variation between parts.

2. High dimensional accuracy

In the forging process of Forging parts at the bottom of the oil cylinder, high dimensional accuracy and shape accuracy can be obtained through the precise forming of dies.

3. Reduce the amount of subsequent processing

The forming precision of the Forging parts at the bottom of the oil cylinder is high, and the subsequent processing amount is relatively small, thus saving the processing cost and time.

4. Meet the requirements of complex working conditions

The Forging parts at the bottom of the oil cylinder has excellent mechanical properties and structural integrity, which can meet the use requirements under complex working conditions and ensure the long-term stable operation of the equipment.

5. high tenacity

The fiber structure of the Forging parts at the bottom of the oil cylinder is reasonably distributed, which improves the toughness of the material and enables the Forging parts at the bottom of the oil cylinder to bear greater impact force and alternating stress.

Forging parts at the bottom of the oil cylinder

5、Forging parts at the bottom of the oil cylinder characteristics

Forging parts at the bottom of the oil cylinderHigh production efficiency,Good anti-fatigue performance,high-intensity,Can bear large impact force or heavy load.,High productivity，super quality and competitive price。

Forging parts at the bottom of the oil cylinder

6、Introduction of Forging parts at the bottom of the oil cylinder characteristics

Forging parts at the bottom of the oil cylinderit has the characteristics of Light weight, Save raw materials, high-precision, Can bear large impact force or heavy load. and Great forging flexibility，is a Forging parts at the bottom of the oil cylinder，is based on Jianing forging is a kind of Forging parts at the bottom of the oil cylinder manufactured by Jianing。

Forging parts at the bottom of the oil cylinder

Forging parts at the bottom of the oil cylinderthe forging machine is used to exert pressure on the blank.，it can be used in rail traffic, power, war industry, manufacturing industry, automobile and other industries。