What is a annular gear? ring gear specifications, models, and parameters

annular gearis a annular gear made by forging process, with specific tooth shape and size to meet the requirements of transmission machinery.，the product looks atmospheric.，it has the characteristics of The tooth shape accuracy is high., Wide range of applications, Environmental protection advantage, Thick teeth and High precision，the advantage is Because of its strong bearing capacity, high precision and good wear resistance, the service life of the annular gear is relatively long.、Because of its excellent performance, it is widely used in aerospace, automobile, metallurgy, mining and other fields. Especially under extreme working conditions such as high load, high speed load and high temperature load, the advantages of forged annular gears are more prominent.、Forging process not only improves the strength and toughness of the annular gear, but also helps to improve the mechanical properties of the annular gear.、The application of alloy steel material and heat treatment technology makes the annular gear surface hard and wear resistant.、It can ensure that the size accuracy and shape accuracy of the annular gear reach a higher level.，It has a wide range of uses, and is often used inBear load and impact,Bear load and impact,Transmit motion and power.,Improve transmission accuracy and efficiency,Transmit motion and power. and so on。The following is to introduce the annular gear:

1、Brief introduction of annular gear

annular gearis an important part of transmission mechanical devices.，it can be used in Construction machinery and equipment, petrochemical industry, petrochemical industry, mining machinery, Construction machinery and equipment and other industries，is a kind of high quality and low price annular gear，is developed and improved by Jianing。

annular gear

2、annular gear advantage

The advantages of annular gear are as follows:

1. Improve production efficiency and material utilization rate

Forging process can usually form multiple annular gears at one time, and there are fewer subsequent processing steps, thus improving production efficiency. At the same time, due to the high utilization rate of materials in the forging process, the waste of materials is reduced and the production cost is reduced.

2. Improve the overall mechanical properties.

Forging process not only improves the strength and toughness of the annular gear, but also helps to improve the mechanical properties of the annular gear. The improvement of these properties is helpful to improve the overall performance and stability of the transmission system.

3. Long service life

Because of its strong bearing capacity, high precision and good wear resistance, the service life of the annular gear is relatively long.

4. Good wear resistance

The application of alloy steel material and heat treatment technology makes the annular gear surface hard and wear resistant.

5. High strength and toughness

The annular gear is manufactured by forging process, and the metal material undergoes plastic deformation at high temperature and high pressure, which eliminates internal defects such as pores and slag inclusion, and makes the material structure more dense. This compact structure makes the annular gear have higher strength and toughness, can bear greater load and impact, and improves the durability and reliability of the annular gear.

annular gear

3、annular gear application

annular gearWidely used inBear load and impact,Improve transmission accuracy and efficiency,Transmit motion and power.,Bear load and impact,Improve transmission accuracy and efficiency and so on，the main features are Uniform material, Environmental protection advantage, Improve the overall mechanical properties., Long service life and High strength，is a popular annular gear，Because of its excellent performance, it is widely used in aerospace, automobile, metallurgy, mining and other fields. Especially under extreme working conditions such as high load, high speed load and high temperature load, the advantages of forged annular gears are more prominent.、By forging process, metal materials are plastically deformed at high temperature and high pressure, which eliminates internal defects, such as porosity and slag inclusion, and makes the material structure more dense. This compact structure makes the annular gear have higher strength and toughness, can bear greater load and impact, and improves the durability and reliability of the annular gear.、It can ensure that the size accuracy and shape accuracy of the annular gear reach a higher level.、Because of its strong bearing capacity, high precision and good wear resistance, the service life of the annular gear is relatively long.、In the process of forging, the grain of metal material is refined and the hardness is improved, thus enhancing the wear resistance of the annular gear. This enables the annular gear to maintain good performance and prolong its service life during long-term use.，the product looks beautiful.。

annular gear

4、Video analysis of annular gear

Jianing forging provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the annular gear production process and production site, and gain favorable comments and recognition from customers.。

annular gear

As you can see from the live video.，Shanxi jianing forging co., ltd features include Can continuously mesh to transmit motion and power., The rim is toothed., Wide range of applications, High hardness and Good wear resistance。

5、annular gear performance advantage

annular gears have the following advantages.

1. High precision

In forging process, the dimensional accuracy and shape accuracy of the annular gear can be ensured through accurate die design and control. Compared with casting and other processes, the forging annular gear has lower error and more accurate tooth profile, which is helpful to improve the stability and efficiency of the transmission system.

2. Strong bearing capacity

After the forging process, the internal structure of the annular gear is compact, and there are no defects such as porosity and slag inclusion, so the bearing capacity is strong.

3. Improve production efficiency and material utilization rate

Forging process can usually form multiple annular gears at one time, and there are fewer subsequent processing steps, thus improving production efficiency. At the same time, due to the high utilization rate of materials in the forging process, the waste of materials is reduced and the production cost is reduced.

4. High precision

In forging process, the dimensional accuracy and shape accuracy of the annular gear can be ensured through accurate die design and control. Compared with casting and other processes, the forging annular gear has lower error and more accurate tooth profile, which is helpful to improve the stability and efficiency of the transmission system.

5. High strength and toughness

The annular gear is manufactured by forging process, and the metal material undergoes plastic deformation at high temperature and high pressure, which eliminates internal defects such as pores and slag inclusion, and makes the material structure more dense. This compact structure makes the annular gear have higher strength and toughness, can bear greater load and impact, and improves the durability and reliability of the annular gear.

annular gear

6、Jianing workshop pictures

The finished products of the annular gear factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Jianing forging

The finished products of the annular gear factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

annular gearIn the process of forging, the grain of metal material is refined and the hardness is improved, thus enhancing the wear resistance of the annular gear. This enables the annular gear to maintain good performance and prolong its service life during long-term use.、Improve production efficiency and material utilization: Forging process can usually form multiple annular gears at one time, and there are fewer subsequent processing steps, thus improving production efficiency. At the same time, due to the high utilization rate of materials in the forging process, the waste of materials is reduced and the production cost is reduced.、In forging process, the dimensional accuracy and shape accuracy of the annular gear can be ensured through accurate die design and control. Compared with casting and other processes, the forging annular gear has lower error and more accurate tooth profile, which is helpful to improve the stability and efficiency of the transmission system.、By forging process, metal materials are plastically deformed at high temperature and high pressure, which eliminates internal defects, such as porosity and slag inclusion, and makes the material structure more dense. This compact structure makes the annular gear have higher strength and toughness, can bear greater load and impact, and improves the durability and reliability of the annular gear.、After forging process, the internal structure is compact, and there are no defects such as porosity and slag inclusion, so the bearing capacity is strong.，the product looks beautiful.，It is mostly used in Transmit motion and power., Bear load and impact, Improve transmission accuracy and efficiency, Transmit motion and power., Bear load and impact, Improve transmission accuracy and efficiency and so on。